Production Specification
10
14
OUTPUT BUTTON
selecting the numbered output port to be
configured
15
INPUT BUTTON
selecting the numbered input port to be
configured
16
ENTER
Confirm your operation
17
ESC
Cancel the last operation
18
MENU
The menu key contains 5 submenus
EDID Operation
The matrix has two ways to read the EDID. The factory default setting automatic read mode.
Automatically read EDID.
When the matrix output port is connected to the display device, the matrix will automatically read the
output device connected to the display device EDID information, and then integrated all the equipment
EDID information, combined with a most suitable EDID sent to the input. As long as the output port has
a plug action, the matrix will be based on the latest EDID information re-combination.
Manually read EDID
Press CTRL key for a long time to enter CTRL EDID mode. As shown below: There are 7 ways to
choose EDID
Pic 14
When the matrix enters the CTRL EDID mode, The 7 digits corresponding to EDID correspond to 7
EDID modes respectively, and can be selected in the input key bar. PORT corresponding numbers
that need to set the input port, and can be selected in the output key bar. Each input can choose
the same or choose different EDID mode.
After selecting PORT and EDID mode, press ENTER to
confirm the selection.
Now began to introduce seven kinds of EDID mode settings:
1
）、
Mix mode
Press the input bar 1, then select automatic read EDID mode.
2
）
、
Copy mode
Press the input bar 2, then select Copy mode. In this way, the matrix reads the EDID information of the
devices connected to a single output port to the matrix, not combined. By default, the first output port
to read, read a valid EDID information so far.
