Brightline 1.1N, Operating Instructions Manual

Page: 3 / 11

3
1. While firmly grasping fixture, loosen palm
handles (Fig.3).
2. Adjust tilt of fixture, as desired.
3. Retighten tee handles.
Figure 3
Adjusting the Yoke
Installing the Yoke
1. Position yoke over mounting holes in fixture (Fig. 1).
2. Thread #10-32 screw and flat washer into place as
shown (Fig. 1).
3. Repeat Step #2 for remaining screw and washer (Fig. 2).
Figure 2
Figure 1
Palm Handles
#10 Screw
Palm Handle #10 Washer