Always disconnect from the mains, when the device is not in use or before cleaning it.
Only handle the power cord by the plug. Never pull out the plug by tugging the power
cord.
During initial start-up some smoke or smell may arise. This is a normal process and
does not necessarily mean that the device is defective, it should decrease gradually.
Please don’t project the beam onto combustible substances.
If the external flexible cable or cord of this luminaire is damaged, it shall be
exclusively replaced by the manufacturer or his service agent or a similar qualified
person in order to avoid a hazard.
CAUTION!
Never touch the device during operation!
The housing may heat up!
C
CAUTION!
N
Never look directly into the light source,
A
As sensitive persons may suffer an epileptic shock.
Please be aware that damages caused by manual modifications to be the device are
not subject to warranty. Keep away from children and non-professionals.
CLEANING AND MAINTENANCE
1.
To reduce the risk of electrical shock or fire, do not expose this unit to rain or
moisture.
2.
Do not spill water or other liquids into or on to your unit.
3.
During long periods of non-use, disconnect the unit’s main power.
4.
It should be installed in a well-ventilated place, at a distance of 50 centimeters or
more with the walls. At the same time, please check if the fan and ventilation holes
are unobstructed.
The following points have to be considered during the inspection
1)
All screws for installing the devices or parts of the device have to be tightly
connected and must not be corroded.
2)
There must not be any deformations on the housing. Fixations and installations
spots(ceiling, suspension, trussing).
3)
Mechanically moved parts must not show any traces of wearing and must not
rotate with unbalances.
4)
The electric power supply cables must not show any damage, material fatigue or
sediments. Further instructions depending on the installation spot and usage
have to be adhered by a skilled installer and any safety problems have to be
removed.
CAUTION!
Disconnect from mains before starting maintenance operation!
6
