BrightDrop EV600 2022, Owner'S Manual, Page: 77 / 229

BrightDrop EV600 Owner Manual (GMNA-Localizing-U.S.-15563034) -
2022 - CRC - 9/29/21
Lighting 77
Turn and Lane-Change Signals
Move the lever all the way up or down to
signal a turn.
An arrow on the instrument cluster will
flash in the direction of the turn or lane
change.
Raise or lower the lever until the arrow
starts to flash to signal a lane change. Hold
it there until the lane change is complete.
If the lever is moved momentarily to the
lane change position, the arrow will flash
three times. It will flash six times if Tow/
Haul Mode is active.
The lever returns to its starting position
when it is released.
If after signaling a turn or lane change, the
arrow flashes rapidly or does not come on, a
signal LED may be burned out.
If a LED is not burned out, check the fuse.
See
Instrument Panel Fuse Block 0 169 .
See your dealer for service.
Cornering Lamps
If equipped with cornering lamps, they
automatically come on when all of the
following occur:
. The low-beam headlamps are on.
. The turn signals are activated or the
steering wheel is at a turning angle.
. The vehicle speed is below 40 km/h
(25 mph).
Exterior Cargo Lamps
The exterior cargo lamps provide more light
in the rear of the vehicle, if needed.
Press the following button to turn the
exterior cargo lamps on or off:
The shift lever must be in P (Park),
R (Reverse), or N (Neutral) to operate the
cargo lamp.
Initial Press:
‐ Cargo lamps – On
‐ Cargo Switch Indicator, if equipped – On
Next Press (if within five seconds of the
previous button press) :
‐ Cargo lamps – Off
‐ Cargo Switch Indicator, if equipped – Off
Become familiar with and follow all state
and local laws that apply to cargo lamp
operation.