Features Menu
The Features menu has options for channel linking and external stomp switch control.
Channel Control Settings
These settings correspond to the
Aux
input on the front panel. At the current time the
Foot-Sw
and
Aux
buttons are disabled for future use. To enable a foot switch check the
Enable Control
box. Select from the list the channels you want to control. The foot switch will allow you to
shut down the LED's on the selected channels with one switch or turn them fully on with the
other switch ignoring the input. This can be useful when there is no DMX control and the
drummer wants to take control on stage. If DMX is in use, it can override this control.
The
Aux
input is a tip, ring, sleeve configuration. The sleeve is ground, the ring is
Channels on
and the tip is
Disable channels
.
A very basic dual foot switch is all that is needed. No active components can be in the foot
switch. Simply grounding the proper pin will activate the function. A good example of this type
of switch would be a Vox VFS-2.
**Under no circumstances should any voltage be applied to the Aux input. Damage can occur!
