22
Troubleshooting & Adjustment
Figure 10. Seat Adjustment
A. Seat Adjustment Lever
B. Carriage Bolt, Spacer, Washer, and Nut
C. Seat Spring
A
C
B
Battery Charging
A dead battery or one too weak to start the engine may be
the result of a defect in the charging system or other
electrical component. If there is any doubt about the
cause of the problem, see your dealer. If you need to
replace the battery, follow the steps under
Cleaning the
Battery & Cables
.
To charge the battery, follow the instructions provided by
the battery charger manufacturer as well as all warnings
included in the safety rules sections of this book. Charge
the battery until fully charged. Do not charge at a rate
higher than 10 amps.
Brake Adjustment
This unit does not have a user-adjustable brake. If brake
does not function properly, see your dealer.
Seat Adjustment
Pitch Adjustment
The pitch of the seat can be adjusted to one of three
positions. To adjust, remove the carriage bolts, spacers,
washers, and nuts (B, Figure 10) from the hinge and
reinstall them in the desired holes.
Seat Slide Adjustment
The seat can also be adjusted forward and back. Move
the lever (A, Figure 10), position the seat as desired, and
release the lever to lock the seat into position.
Seat Spring Adjustment
The seat springs (C, Figure 10) can be adjusted to
provide a softer or firmer ride. Tilt the seat forward and
slide the spring assembly (C) forward for a softer ride,
and back for a firmer ride.
Manual Lift Assist Adjustment
Models with large, left-side lift lever. If the manual lift does
not function properly, see your dealer.
WARNING
Keep open flames and sparks away from the
battery; the gasses coming from it are highly
explosive. Ventilate the battery well during
charging.
Not
for
Reproduction
