21
REPAIR PARTS
SNOW THROWER - MODEL NO.
630106X31
(96197001200)
AUGER HOUSING / IMPELLER ASSEMBLY
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
KEY PART
NO. NO. DESCRIPTION
4 191079 Pulley, Impeller
5 188909 Bearing Assembly, Flange
6 198541 Nut, Hex Flange 5/16-18
7 180355 Bolt, Flat Head, Carriage 5/16-18
x 5/8
8 72270505 Bolt, Carriage 5/16-18 x 5/8
9 199879 Bolt, Hex Head
10 404927X459 Housing, Auger
11 404933X479 Bar, Scraper
12 178675X008 Bracket, Corner Discharge
13 175322 Base, Discharge Chute
14 19111507 Washer, Flat
15 198552 Washer, Lock 5/16
16 74950512 Screw, Hex Head 5/16-18 x 3/4
17 155595 Grease Fitting
18 179582 Screw, Hex Head 5/16 x 1
19 73800400 Nut, Hex Lock 1/4-20
20 198541 Nut, Hex Lock 5/16-18
21 401347 Washer, Flat 5/16
22 178777X479 Skid Plate, RH
24 128638 Wing Nut
25 72270506 Bolt, Shoulder 1/4-20
26 174658 Bearing, Auger
28 198636 * Bolt, Shear
29 174762X479 Skid Plate, LH
30 405973X479 Auger Assembly, RH
31 405972X479 Auger Assembly, LH
KEY PART
NO. NO. DESCRIPTION
32 407768 O-Ring
33 407769 Bushing, Flange 3/4
34 174681 Washer, Thrust 3/4
35 174684 Bearing, Thrust 3/4
36 407757 Shaft, Impeller
37 174683 Washer, Thrust 5/8
38 407758 Bushing, Flange 5/8
39 407767 Screw, Hex Head 5/16-18 x 3/4
40 407760 Plug, Case
41 407761 Housing, Gearbox, RH
42 407770 Seal, Oil
43 407762 Bushing, Flange, 1"
44 189282 Key, Square 1/4 x 1/4 x 7/8
45 407763 Gear, Worm
46 407764 Shaft, Auger
47 407765 Housing, Gearbox, LH
48 175321X479 Impeller Assembly
49 74780426 Screw, Hex Head 1/4-20 x 1-5/8
50 407766 Gasket, Gearbox
51 7836M Pin, Roll 3/16 x 1-1/8
52 405697X479 Bar, Drift Cutter
53 198648 Bolt, Carriage
54 198709 Stop
55 198638 Spacer
56 180684 Multi-Wrench
57 196710 Gearbox Assembly
*
Shear Bolts available through Home Depot
(Part Number 500026X00)
