10
Assembly
3. Align chute (
N
, Figure 3) notch (
*
) on chute with housing
chute ring tab (*
*
) and slide chute into place.
*
**
N
Figure 3
4. Rotate chute 180 degrees to front. Chute (
N
, Figure 4)
opening should be facing front / center of machine.
N
Figure 4
Unpacking
1. Position box close to the tractor and carefully unpack
and organize snowthrower parts.
IMPORTANT:
See Figure 1 for correct orientation of
snow drive pulley hub.
2. If snow drive pulley hub orientation is
incorrect
, loosen
set screw, remove and flip pulley to correct orientation
and tighten set-screw.
CORRECT
INCORRECT
*
Figure 1
Chute Assembly
1. Remove gear cover (
*
, Figure 2) from the snowthrower
assembly by removing hex screw (**) and tilting the
gear cover to disengage tab on opposite side of box.
2. Remove chute rotator gear (
*
,Figure 2) from shaft.
*
**
*
Figure 2
No
t fo
r
Rep
rod
uct
ion
