Install the Discharge Chute
NOTE:
Some models have the discharge chute already
installed.
Place discharge chute (
1.
M
, Figure 5) over tabs on chute
ring (
N
) as shown.
Secure discharge chute with three carriage bolts (
2.
O
) and
nuts (
P
).
Figure 5
Route De
fl
ector Cable & Clip (if included)
Figure 6
Figure 7
Figure 4
L
NOTE:
If the chute rotation is slow or binding, loosen the
chute rotation screws (
L
, Figure 4) 1/4 turn.
M
N
O
P
P
P
3. Tighten hardware to 66 in-lbs (7.6 Nm).
4. Connect the wire harness (electric chute models only).
NOTE:
Check all bolts and nuts in
fl
ange for tightness. Do not
overtighten.
Not
for
Reproduction