Briggs & Stratton 110600 series, Operating & Maintenance Instructions

Page: 9 / 20

264v11,12 - page 9 (Black)
Screen angle and frequency: 45.0000, 150.0000
9
STARTING AND STOPPING
REWIND (MANUAL) STARTER
TO START ENGINE
[1] Check oil level (see p. 7).
[2] Open fuel shut-off valve
(if equipped) 1/4 turn.
[3] Move throttle to FAST (if equipped).
Operate engine with throttle in FAST
[4] Push stop switch (if equipped) to ON.
[5] Firmly push primer bulb 3 times OR
[6] Rotate choke knob or move choke
control lever to CHOKE position.
Primer Choke
[7] Close safety brake
handle on lawn mowers
and any other equipment
with this feature.
[8] Grasp rope handle. Pull
slowly until resistance is
felt, then pull rapidly to
start engine and avoid
kickback.
[9] Let engine warm up.
Choke Equipped: Rota-
te knob or move choke
control lever toward RUN
a short distance at a time
over several seconds in
warm weather or minutes
in cold weather. Let en-
gine run smoothly before
each change. Operate
with choke in RUN.
WARNING
TO STOP ENGINE
CAUTION: Do not stop engine by moving choke
control to CHOKE. Backfire, fire or engine damage
could occur.
[1] Move throttle (if equipped) to
SLOW, then release safety
brake control handle.
[2] Move throttle (if equipped)
to SLOW, then to STOP.
OR
[3] Close fuel shut-off valve (if
equipped).
[4] Push stop switch (if equipped) to OFF.