If you don’t want the sound to be recorded, you can mute the microphone. When
the camera is recording, press the [
] button. When the microphone is off, the
microphone icon on the display is crossed out.
To turn the microphone back on, press the [
] button again.
To setup your dashboard camera, press [
M
] button. If the camera is recording, first
stop the recording by pressing [
OK
] button.
There are two settings pages: settings for video recording, and global settings. To
switch between settings pages, press [
M
] button. To highlight a setting, use [
]
and [
] buttons, and then press [
OK
] to select.
Change values with [
] and [
] buttons, and then press [
OK
] button to confirm
a setting. To go back to menu without saving a setting, press [
M
] button.
For detailed description of available settings, refer to Settings reference section.
When
rear
camera
is
connected, live feed from
both front and rear cameras
is shown on the display as
picture-in-picture.
Each camera feed can be
shown full screen or in
picture-in-picture mode.
To cycle between modes,
press
[
]
button.
1
Setting up your camera
Switching between camera views
Muting the microphone
NOTE:
Once you turned off the microphone, it does not
turn back on automatically. So if the microphone is
off, next time you turn on the camera, it will stay
turned off. Press [
] again to turn it back on.
