Brigade MDR-504-500, Installation And Operation Manual

Page: 40 / 92

40
Warning: After inserting SD cards
into a SD card reader, Windows™
may request to format them as
shown below (right). Click Cancel
.
Formatting SD card will delete the
data from the SD card.
•
To retrieve data from the HDD,
connect the MCU which
contains the HDD to the local
PC using the USB-B cable. If
the MCU does not power on
then connect both USB-B
cables. If MCU still does not
power on, then switch to
another USB port.
Loading Screen Figure 142
Eject SD Figure 143
•
Once the MCU has powered on,
click the refresh icon , the
vehicle will appear as green to
indicate it is available for
browsing.
•
The number of connected
MCUs connected the PC will be
displayed under
HDD COUNT .
See HDD Count Figure 145 .
Cancel Format Disk Figure 144
HDD Count Figure 145
9.6 MDR-Dashboard 5.0 Local Mode
MDR-Dashboard 5.0 User Interface Figure 146
The MDR-Dashboard 5.0 user interface is sub-divided into several
numbered areas as illustrated in
MDR-Dashboard 5.0 User Interface
Figure 146 :
1. Data Source Access ( Data Source Figure 167 )
2. Graphs Panel
3. Controls Panel
4. Media Playback
5. Map
6. Frame Information
All the above areas are explained in greater detail in the following
sections. During playback, users can zoom in/out on the timeline by
either using the +/- buttons or the mouse scroll wheel. The vertical
blue line can be positioned to the desired time by either dragging it or
by clicking on the timeline directly.
Frame Information Figure 147
4
5
6
2
3
6