4
5
English
Safety information
Read the following safety information to properly use the product.
Safety symbols in this guide
"Warning" - Indicates a potential hazard which, if not avoided, may result in
injury or death.
"Caution" - Indicates a potential hazard which, if not avoided, may result in
minor injury or property damage.
"Note" - Provides useful information to help users better utilize the
product's features.
Safety information for proper use
Driving and product operation
• Do not operate the product while driving a vehicle.
• Install the product in places where the driver's view is not obstructed.
Check with your state and municipal laws before mounting the product to
the windshield.
Power supply
• Do not operate or handle the power cable with wet hands.
• Do not use damaged power cables.
• Keep the power cable away from all heat sources.
• Use the power cable with the correct connector and make sure the
power cable is connected securely and is firmly in place.
• Do not modify or cut the power cable. Also, do not place heavy objects
on the power cable or pull, insert, or bend the power cable using excessive
force.
• Use only genuine accessories from Brigade or an authorized Brigade
dealer. Brigade does not guarantee compatibility and normal operation of
third-party accessories.
• When connecting the power cable to the product, ensure that the
connection between the cable plug and the power cable connector
on the product is secure. Video recording is not available if the power
connector is disconnected.
Children and pets
• Ensure that the product is out of the reach of children and pets. If the
product breaks, it may result in fatal damage.
Other information about the product
Product management and operation
• Do not expose the product to direct sunlight or intense light. The lens
or internal circuitry may fail otherwise.
• Use the product at a temperature between 14°F and 140°F (-10°C to
60°C) and store the product at a temperature between -4°F and 158°F
(-20°C to 70°C). The product may not fuction as designed and some
permanent physical damages may result if it is operated or stored out of
the specified temperature ranges. Such damages are not covered by the
warranty.
• Frequently check the product for the proper installation position.
Impact caused by extreme road conditions may alter the installation
position. Ensure that the product is positioned as instructed in this guide.
• Do not apply excessive force when pressing the buttons. Doing so may
damage the buttons.
• Do not use chemical cleaners or solvents to clean the product. Clean
the product using a clean, soft, and dry fabric.
• Do not disassemble the product or subject the product to impact.
Unauthorized disassembly of the product voids the product warranty.
• Handle with care. If you drop, mishandle, or expose the product to
external shocks, it may cause damage and/or result in the malfunction of
the product.
• Avoid excessive humidity and do not allow any water to enter the
product.
• Depending on the make and model of your vehicle, the power may be
constantly supplied to the dash cam even when the ignition is turned
off. Installation of the device to a continuously powered outlet could
result in vehicle battery drainage.
• This device is designed to record video while the vehicle is in operation. The
quality of the video might be affected by weather conditions and the road
environment, such as whether it is day or night, presence of street lighting,
entering/exiting tunnels, and the surrounding temperature.
• Although designed to withstand high-impact car collisions, Brigade does
NOT guarantee the recording of accidents when the device is damaged as
a result of the accident.
• Keep the windshield and camera lens clean for optimal video quality.
Particles and substances on the camera lens or windshield may reduce the
quality of the recorded videos.
• This device is intended to be used inside the vehicle only.
