— 27 —
Series "NAVIGATOR" N485 2020
2384D.01
REBOARDING MEANS.
Foldable ladder is installed on the stern of the boat on the left side(Fig.D9B).
If you are in the water and the ladder is folded, you can lay it out and get back on board.
The ladder can be secured with velcro. Just unplug it.
Be careful -
the rotating propeller on
the engine
DO NOT forget
to fold the ladder after
use
stern cleats
MOORING. Strong points.
For mooring on the boat model N485 installed two stern cleats (Fig.D9C).Use only these cleats for mooring.
Do not use other parts and elements of the boat for mooring.Make sure that the mooring rope does not damage the buoyancy tube or other
elements of the boat.Rope for mooring must be appropriate strength, diameter and length.For bow mooring you can use clam-bollard, but
only in calm water for a short time.If you are leaving the boat and there is a possibility of rough water or strong wind, use only bow U-bolt
to bow mooring.
clam-bollard
Fig.D9C
bow U-bolt
Cleats are designed for a maximum
load of 14kN.
The breaking strength of rope shall in
general not exc eed 80% of the
breaking strength of the respective
strong point.
Be careful when mooring.
Sud denl y
tens ioned
mooring ropes may cause
injury.
