– 1 3 –
2359.01
HD Series
8.4.No water shall penetrate inside the balloons of the Boat and any contacts of fuel and oil with its external surfaces shall be avoided. In
case of fouling of surfaces of the Boat with combustible materials, a fouled place shall be thoroughly washed with soapy water and dried out.
Avoid an excessive increase of pressure in the balloons of the Boat, especially, by its exposure to direct sunlight.
9 . S T O R A G E A N D T R A N S P O R T A T I O N
9.1.To prepare the Boat for storage, pump it up, thoroughly clean the boarding, thwart to remove dirt, blow them over with compressed
air or dry them up outdoors in a shadowed place.
9.2.Proceed to folding from the afterbody of the Boat. Open the valves and switch the valves over into condition "OPEN" (look before).
9.3.The Boat shall be stored in the standard package in a dry closed room at temperature from 0 to +20°C. Storage of the Boat with
temperature variations from minus 30°C to plus 45°C may be allowed for not longer than 1 month. The Boats to be stored under the subzero
temperature conditions shall be maintained packed within at least 1 hour at temperature above 0°C.
9.4.While been stored the Boat shall be protected against direct sunlight. The Boat shall be at least 0.5 m distant from the walls and
the floor of the storeroom and at least 1 m distant from heating elements.
9.5.The Boats may not be stored in the common room with active chemical agents which might cause damage to the coating and textile
materials, as well as to adhesive joints.
9.6.The Boats packed in covers and cartons may be transported by all means of transport.
In case of transportation of the Boat together with its wooden accessories, the latters shall be isolated from the fabric of the Boat by
means of paper or a layer of cloth.
In case of transportation of the Boat in the assembled/disassembled condition, one shall avoid sharp pounding, kicks, jerks, and shocks
which may cause damage to the components of the Boat.
