background image

2381.01-2003

— 7 —

BEAUFORT Wind Scale and Corresponding State of the Sea, After Few Hours of Wind, Away From the Coast.

Boat Design Categories (Directive 2003/44/EC):

NOTE: 

The significant wave height

 is the mean height of the highest one-third of the waves, which approximately

corresponds to the wave height estimated by an experienced observed. Some waves will be double this height.

Design category

"A" - "Ocean"
"B"- "Offshore"
"C"- "Inshore"
"D"- "Sheltered waters"

Wind force
(Beaufort scale)

exceeding 8
up to,and including, 8
up to,and including, 6
up to,and including, 4

Significant wave height

exceeding 4
up to,and including, 4
up to,and including, 2
up to,and including, 0.3

                   State of the sea

Force

Denomination

Knots

Km/h

m/sec

                   and wave height in meters

0

Calm

<1

<1

0-0.2

Calm

0

1

Light Air

1-3

1-5

0.3-1.5

Calm

0

2

Light Breeze

4-6

6-11

1.6-3.3

Almost calm

0.2

3

Gentle Breez

7-10

12-19

3.4-5.4

Almost calm

0.2

4

Moderate Breeze

11-16

20-28

5.5-7.9

Small waves

0.5

5

Strong Breeze

17-21

29-38

8.0-10.7

Large waves

1.25

6

Fresh Wind

22-27

39-49

10.8-13.8

Large waves

2.0

7

Strong Wind

28-33

50-61

13.9-17.1

Very large waves

2.5

8

Gale

34-40

62-74

17.2-20.7

Rough sea

4

9

Strong Gale

41-47

75-88

20.8-24.4

Very rough sea

6

10

Storm

48-55

89-102

24.5-28.4

Heavy

9

11

Violent Storm

56-63

103-117

28.5-32.6

Very heavy

14

12

Hurricane

64 and over

118 and over

32.7and over

Stormy

14 and over

Summary of Contents for FALCON 360H series

























Reviews: