Note: By default WANrockIT units have the left hand port (Port A) as the
target port and the right hand port (Port B) as the initiator port.
When the multi-mode cables are inserted in to the SFP, a “click” should be heard.
Connecting the Power Supply
Important: Before connecting the power cord, ensure that the wall or rack
plug is removed or is switched off.
Depending on the configuration you purchased, the Appliance may contain one or two power
supplies.
With a redundant power supply configuration, the system evenly distributes power across both
power supplies to maximise efficiency. In order to utilise this feature, please ensure that both power
supplies are connected.
Connect the power supply to the rear of the Appliance as shown below and turn on the power from
the wall socket.
14
