Page 55 of 84
040-57105-01
Secure Shell allows the data to be exchanged using a secure channel between
the radio and the accessing device. The encryption used by SSH provides
confidentiality and integrity of data over an insecure network.
The Configuration page allows for the following settings:
Mode: Enable / Disable (Default)
Save Button: This button must be click to save the new settings
before moving to another page.
Reset Button: If configuration has been applied but has not been
saved, clicking this button will reset the page back to previous settings.
HTTPS
Selecting from the navigation pane Switch>Configuration>
Security>Switch>HTTPS will open the following screen:
Figure 36: Authentication Method Configuration Page
Hypertext Transfer Protocol over Secure Socket Layer (HTTPS) provides
authentication and encrypted communication for sensitive communication.
HTTPS uses port 443. SSL uses a 40-bit key size for the RC4 stream
encryption algorithm.
The Configuration page allows for the following settings:
Mode: Enable / Disable (Default setting)
When Disabled, the unit will automatically redirect browser to port
80/HTTP connection
Automatic Redirect: Enable / Disable (Default setting)
Mode has to be Enabled before Automatic Redirect can work. Redirects
Web Browser to an HTTPS connection.
Save Button: This button must be click to save the new settings
before moving to another page.
Reset Button: If configuration has been applied but has not been
saved, clicking this button will reset the page back to previous settings.
Access Management
