VP-4 User Manual
49
Figure 7.18 Alarm Input Settings-Arming Time
3.
Set the arming schedule for the alarm input. Refer to
Step 2
Set the Arming Schedule for Motion Detection
in
Section
7.3.1 Configuring Motion Detection.
4.
Click the
Linking Metho
d tab to set the actions taken for the alarm input. Refer to
Step 3
Set the Alarm
Actions Taken for Motion Detection
in
Section
7.3.1 Configuring Motion Detection
.
5.
You can also choose the PTZ linking for the alarm input if your camera is installed with a pan/tilt unit.
(1)
Choose the PTZ Linking channel.
(2)
Check the relative checkbox to enable Preset Calling, Patrol Calling or Pattern Calling.
Figure 7.19 Alarm Input Settings-Linking Method