2.6.3 Retract Windrow Arms
Ensure that the rear opening is in the narrow position by fully stroking the
windrow adjustment cylinder. Then bring in the arms by retracting the wing
cylinder until the front castors are brought in near the hitch.
2.6.4 Transport Links
Ensure that the rear opening is in the narrow position by fully stroking the
windrow adjustment cylinder. Then bring in the arms by retracting the wing
cylinder until the front castors are brought in near the hitch.
The transport links must then be installed. First, remove the links from the
carrying brackets by removing the pin at each end, as shown below.
