Bridgeview BALE KING 8200, Operator'S & Parts Manual

Page: 14 / 63

Bridgeview Manufacturing Inc. 11
Rear Fork Tines
The rear fork bale tines can be adjusted side to side by removing the
pin connecting the tine to the machine and replacing the tine in the
other available gap.
For transport and safety when working under the forks, install
the red safety locks onto the lift cylinder, and fasten in place using the
supplied pin.
Wing
The BK 8200 features a pivoting wing on the left side of the machine to allow for easier loading
and processing of square bales. The wing is lowered completely to load the bale, and can then be
operated to manipulate the bale as
required to cut the twines and
process the bale. The wing also
needs to be lowered slightly to load
a round bale into the tub. The wing
should be raised completely, with
the cylinder safety lock installed, for
transport or any service work.