Bridgeview BALE KING 5300 Series Operator'S & Parts Manual Download Page 25

Page: 25 / 105

Bridgeview Manufacturing Inc.

Optional 3 Bale Kit (5300X)

The Bale King 5300 has an available attachment kit which increases the carrying capacity

of the processor by 50%, while maintaining the easy maneuverability of the two-bale processor.

The attachment kit stores the second loaded bale behind the first and above the third in a set of

powerful hydraulic clamps.

The 3 Bale Kit changes the loading process of the bale processor slightly. The loading of

the second bale involves lifting the bale so the fork and bale are parallel to the ground, or just

above this point. The clamp will be closed around the bale at this point and the fork can be

lowered back to the ground. The third bale can then be backed under and lifted until it is lightly

supporting the second bale. After the first bale processing is complete, the clamp can be opened

(while the third bale is supporting the second), and the fork can be lifted until the third bale

pushes the second into the tub.

Summary of Contents for BALE KING 5300 Series










































































































Search results

Summary of Contents for BALE KING 5300 Series

Reviews:

Related manuals for BALE KING 5300 Series

Brands by name

Popular brands

Bridgeview BALE KING 5300 Series, Operator'S & Parts Manual

Search results

Summary of Contents for BALE KING 5300 Series

Reviews:

Related manuals for BALE KING 5300 Series

Brands by name

Popular brands