Bridgeview BALE KING 5300 Series Operator'S & Parts Manual Download Page 21

Page: 21 / 105

Bridgeview Manufacturing Inc.

Optional Diverter Kit

The Bale King 5300 processor has an optional diverter kit (

BMI # 25091

) which allows it to

operate using only 2 hydraulic remotes. The fork and deflector functions are then controlled by a

cab-mounted switch box. This box must be wired up to the tractor's electrical system.

The diverter kit also features a pilot operated check valve to ensure that the deflector will not fall

down due to leaking across the valve.

A 4-pin plug is used to power the diverter valve on the processor. If no power is supplied, the

hydraulics will still control the rear forks, but the deflector will not be functional. If the switch in

the tractor is activated, the deflector can be controlled. On 5300 machines with an option, this box

can also control grain flow or the 3 Bale Clamp.

Summary of Contents for BALE KING 5300 Series










































































































Search results

Summary of Contents for BALE KING 5300 Series

Reviews:

Related manuals for BALE KING 5300 Series

Brands by name

Popular brands

Bridgeview BALE KING 5300 Series, Operator'S & Parts Manual

Search results

Summary of Contents for BALE KING 5300 Series

Reviews:

Related manuals for BALE KING 5300 Series

Brands by name

Popular brands