Bridgeview BALE KING 5300 Series Operator'S & Parts Manual Download Page 17

Page: 17 / 105

Bridgeview Manufacturing Inc.

Deflector

The Bale King 5300 is equipped with a hydraulic side deflector to change the discharge distance

and distribution. It also comes with a flipping rubber flap for superior control of the spread pattern.

Moving the deflector to the

down

position and flipping the rubber down (above left) will

allow the hay to be laid in a windrow, or bunk feeder. Swinging the deflector

will allow you

to spread straw out over a large area. If you also flip the rubber up (above right), you will be able

to "fine tune" the discharge, to control the height and distance.

To flip the rubber, simply pull on the handle and swing into position. Then push the handle

so that the tabs catch in the notches and lock into place.

The Bale King 5300 deflector will bunk feed to a distance of 35” from the tire when in the

lowest position. When the deflector is not folded, the transport width of the machine is 9’10”.

Summary of Contents for BALE KING 5300 Series










































































































Search results

Summary of Contents for BALE KING 5300 Series

Reviews:

Related manuals for BALE KING 5300 Series

Brands by name

Popular brands

Bridgeview BALE KING 5300 Series, Operator'S & Parts Manual

Search results

Summary of Contents for BALE KING 5300 Series

Reviews:

Related manuals for BALE KING 5300 Series

Brands by name

Popular brands