Copyright © Bridgetek Pte Ltd
12
PanLHub44/80 Datasheet
Version 1.0
Document Reference No.: BRT_000277 Clearance No.: BRT#146
5.7.2
PanLHub80
There are eight RJ45 ports (PORT1 to PORT8) available on PanLHub80 which provides a communication
and power channel to any PanL devices at +24V DC.
A regular network CAT 8P8C cable can be used. Ensure that the length of the RJ45 8P8C cables does not
exceed 100 Metres from the port to the last wired device. In the event that a single port is used to power
up a few PanL devices in a daisy chain configuration, the first connection to a PanL device and the
subsequent connections between the PanL devices must not exceed 50 metres in cable length. The total
combined cable length must not exceed 100 metres. A maximum of two PanL devices is allowed for daisy
chain if there are more than one PD70, PD70PLUS or PD50 device or any combination of these present.
Any other combinations will have a maximum limit of three devices.
5.8
RJ11 Port
5.8.1
PanLHub44
There are four RJ11 ports (SNR1 to SNR4) available on PanLHub44. The ports provides a communication
and power channel to PanL Sensor devices at +5V DC. Use a regular 6P4C 26AWG cable and ensure that
the length of the cables does not exceed 50 Metres from the port to the wired PanL Sensors.
5.8.2
PanLHub80
PanLHub80 does not have any RJ11 Ports.
