8
7.
VOX Level
In standby, press the key programmed as" VOX Level", the radio will
announce current VOX level. Press this key again to adjust VOX level or turn
off VOX.
8.
Scan
In standby, press the key programmed as "Scan", the radio will start scanning
the list on the current channel location, press this key again to turn off the
scan function.
9.
Emergency Alarm
In standby, press the key programmed as" Emergency Alarm", the radio will
start the alarm by its programmed method, press this key again to turn off
alarm.
10.
Record Switch
In standby, press the key programmed as" Record Switch", the radio will
announce "Record on" and start voice recording, press this key again to turn
off recording, the radio will announce "Record off".
Note
: The standard version supports 30 hours of voice recording for DMR
channels.
11.
Monitor
In standby, press the key programmed as "Monitor" function, the radio
will turn off signaling and squelch level to monitor a weak signal or ID not
matched signal. A repeat press of this key will turn off monitor. Note: In
analog mode, the radio will emit white noise.
12.
Send Alarm
In standby, press the key programmed as "Send Alarm" function, the radio
will announce "Alarm" and Alarm Number 1-5 plus the alarm sound. A
repeat press of this key can choose the Alarm Number, then press PTT to
send the chosen alarm sound to a contact list or group members in current
DMR channel.
Note
: This function only valid for DMR channel.
13.
Hot key 1-6
In standby, press the key programmed as "Hot Key X " function to send
signaling for 2TONE, 5TONE, DTMF, Remote kill, remote monitor, beep etc.