![Bridge Command BC-MT-1950 User Manual Download Page 12](http://html1.mh-extra.com/html/bridge-command/bc-mt-1950/bc-mt-1950_user-manual_2810226012.webp)
Installing the display
1. Carefully insert the display into the opening so the gasket on the backside
of the bezel edge lays flat against the front edge of the cut out.
IMPORTANT
:
The gasket must lay flat against the cut out edge to ensure watertight
integrity.
2. Place the mounting bracket lugs into the keyways and move them to the rear, securing
the bracket to the display.
3. Using a suitable screwdriver, tighten the mounting bracket screws to secure the
display in position and compress the gasket.
NOTE: Do not over tighten the mounting screws or gasket can deform and loose waterproof integrity.
11