table surface, then tighten the lock screws.
After planing the stock for several times and achieving the ideal
surface, we recommend flipping the stock and planing again
until there is no more cutting. Now, besides getting the 0.25’’
stock, you make the two surfaces of the stock smooth and
clean.
ADJUSTING THE BLADE DEPTH
Adjusting the blade depth is accomplished by rotating the
combined feed and lateral adjustment knob. Clockwise rotating
the adjustment knob will increase the blade depth, while
counter-clockwise rotating decreases the blade depth. The
increment of one turn of the adjustment knob is 0.07mm (approx.
0.003”).
How to adjust: Loosen the plane iron cap knob, rotate the iron
adjustment knob to make the blade edge flush with the sole face.
Rotate the iron adjustment knob until you achieve the desired
blade depth, then lock the iron cap knob. With no experience,
you can do the trial planing progressively by making 1/2
rotations of the iron adjustment knob until you feel the iron just
begin to cut. Ideally, the iron will protrude a few thousandths of
an inch for a clean,thin shaving.
Finally, this is a precision plane--there is no need to overly
tighten the plane iron cap.
