Page 7
BrickHouse Security User’s Guide
Page 8
BrickHouse Security User’s Guide
To Record
Once the camera module is powered on, push the A button
to record video. You will feel 3 vibration pulses indicating that
recording has begun. (The indicator light will flash Red and
Blue). To stop recording, push the A button again. You will feel
1 short vibration indicating that recording has stopped. (Once
recording stops, the indicator light will return to a steady Red).
Capturing Photos
To capture a photo, push the B button. You will feel 1 short
vibration indicating that a photo has been captured. (NOTE:
You must be in Standby Mode to capture photos.)
Powering Off
To power off the camera module, push and hold the C button
for 3 seconds. You will feel 1 short vibration indicating that the
module has been turned off. (Light Indicator turns off).
Viewing Recorded Files
To view your recorded files, first connect the device via the
supplied USB cord with the Micro SD card inserted to the
device, making sure the device is powered off. It will connect
as a removable drive, and depending on the settings on your
PC, it may automatically notify you that new hardware was
detected. If so, select Open Folder to View Files. If it is not
automatically detected, click Start on your desktop. Select My
