Brickhouse Security DT08, User Manual

Page: 6 / 10

Powering On/Off and Recording Functions
After Inserting the SD card, you will gently press the Image Button until the
RED LED indicator glows. Once the device reads the SD card is present
the RED LED indicator will Flash once and is now in Standby mode. In
Standby Mode the Indicator light will Flash RED and Blue.
To power off you will press the image button for 5 seconds, RED and
BLUE Indicator will flash 5 times and then will power off.
If SD card is not detected the RED LED indicator will Glow red following
BLUE LED Flashes then power off.
Check the SD Card format, remove Micro SD and insert again. Follow the
power on instructions above.
If there the device is left in Standby Mode for more than 5 Minutes the
device will automatically power off.