- 3 -
Installation
1. First, Connect an Ethernet cable into the device Ethernet port and Computer or NVR.
2. Connect EoC-1000M and EoC-1000S with a coaxial cable.
3. Connect EoC-1000S
’ Ethernet port and IP Camera with an Ethernet cable
4. Connect power cord into 12VDC out port and IP CAM power port.
5. Finally, plug in the 24V 2.7A power supply to EoC-1000M
’s power port.
※
1. Please note to plug in the power supply is must be the Final step.
2. When you replace EoC-1000S, please re-plug in the power supply.
LED Signal
1. Power LED: Green light
2. Data LED: Green light and blinks when data transmission.
3. Ethernet LED: Green light and blinks when data transmission.
