16
Noise/Vibration Information
Noise emission values measured according to
relevant standard.
Acoustic pressure level
LpA 87 dB(A) K = 3 dB(A)
Acoustic power level
LwA 110 dB(A) K = 3 dB(A)
ATTENTION !
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
must be worn.
Weighted root mean square acceleration according
to relevant standard. :
main handle 20.135 m / s ² K = 2.16 m / s ²
auxiliary handle 18.087 m / s ² K = 2.16 m / s ²
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
Assembly
Changing the Tool
Before any work on the machine itself, pull
the mains plug.
Clean the tool shank 5 and apply a light coat of
grease.
Tools without Shoulder
Operation
Starting Operation
Observe correct mains voltage! The voltage of
the power source must agree with the voltage
specified on the nameplate of the machine.
Power tools marked with 230 V can also be
operated with 220 V.
Switching On and Off
Summary of Contents for MPV2200-75
Page 2: ...2 1 2 3 4 5 ...
Page 20: ...20 ...
