9
CBS6060 Quick Start Guide ©2022
Step 3:
Connect the power cable from the amplifier to one of the outlets on the RF Remote
Receiver and Amplifier Relay. NOTE: The outlets on the relay are Safety Outlets and
require a bit of force to open the white protective barrier. This is expected.
Step 4:
Set the power switch on the amplifier to the “ON” position indicated by the solid line. If
the green light on the relay is not illuminated, then the amplifier will not turn on. This is
expected behavior.
Step 5:
Setting the amplifier volume may require more than one person with someone outside to
listen to the speakers.
In the Carillon program, select a song by highlighting it. Then click play. You will get a
message below the play button
that says “Play Delayed While Powering on Amplifier.”
You should hear the amplifier turn on. The power light will switch to green. The MUTE
light will turn red for a few seconds and then shut off. At this time, the song should be
playing. Starting with the amplifier at its lowest setting, slowly rotate the volume of
Channel 1 until the outside speaker volume is at an acceptable level.
Note: You may need to repeat this step in order to achieve the best volume.
Once set, the amplifier will shut off on its own. Leave everything powered on and the
preprogramed bell schedule should automatically play.
Thank you!!!
______________________________________
We hope you enjoy your BRG Carillon System. If you have any questions, comments, or
concerns do not hesitate to reach out by calling 1.800.295.0220
Summary of Contents for CBS6060
Page 1: ......
