EN-2020-03
4 | 7
Disassembly
1.
Disconnect all power input cables.
2.
Turn the machine upside down to gain access to
heating elements connection points.
Tip: To gain better access to the connection points,
the control box can be detached and temporarily
removed. To do this you’ll need a 3mm Allen key.
3.
Use the sharp knife to slice the heat shrink tube from bottom to top. Be careful not
to damage the electrical cord outer stealth. Remove the heat shrink tube to gain
access to the brass connector. Use the provided 1.5mm Allan key to loosen the two
set screws. The electrical cord will then come loose.
