BREWHA Equipment Co Ltd.
www.brewhaequipment.com
2017.01
P3/3
Questions related to the use of this controller with BREWHA equipment
should be directed to:
BREWHA Equipment Co Ltd.
625 Frances Ave
Victoria, BC V8Z1A2
www.brewhaequipment.com
e-mail: [email protected] Tel: 1-844-309-5080
Figure 4. Pull the spring loaded collar to remove the sensor cable.
Figure 3. Ridge on ETC and notch on sensor cable must be aligned when connecting. Same is true for the sensor cable and sensor.
female connector on the temperature probe to the red mark of the
male connector on the ETC unit, then hold the tail and push the
female
connector
forward. To remove the connector, pull the spring
loaded collar of the female connector back and the female connector
will detach. Please see the Figure 3 and Figure 4 below for details.
