6
AFTER SALES SERVICE
These appliances are built to the very highest of
standards. There are no user serviceable parts.
Follow these steps if the unit fails to operate:
• Check the instructions have been followed
correctly.
• Check that the fuse has not blown.
• Check that the mains supply is functional.
If the appliance will still not operate, return the
appliance to the place it was purchased for a
replacement. To return the appliance to the
Customer Service Department, follow the steps
below:
1. Pack it carefully (preferably in the original
carton). Ensure the unit is clean.
2. Enclose your name and address and quote the
model number (located on the rating label) on all
correspondence.
3. Give the reason why you’re returning it.
4. If within the guarantee period, state when and
where it was purchased and include proof of
purchase (e.g. till receipt).
5. Send it to our Customer Service Department at
the address below:
Customer Service Department
Jarden Consumer Solutions (Europe) Limited
Middleton Road, Royton, Oldham
OL2 5LN, UK.
Telephone: 0161 621 6900 Fax: 0161 626 0391
e-mail: [email protected]
REPLACEMENT PARTS
For additional or replacement parts, please visit
www.breville.co.uk
or call us on
0161 621
6900
.
TROUBLESHOOTING
For troubleshooting and FAQs visit:
www.breville.co.uk/faqs
TURN ON YOUR CREATIVITY®
Let the Breville® team help you turn on your
creativity with a gateway to a world of food and
drinks without limits. You don’t have to travel far—
just to your computer, tablet or mobile—where you
will discover our FREE website with top tips and
recipes to inspire your imagination. Join us now at:
www.turnonyourcreativity.com
®
ELECTRICAL SAFETY
This appliance must be earthed.
If the plug is not suitable for the socket outlets in
your home, it can be removed and replaced by a
plug of the correct type.
If the fuse in a moulded plug needs to be changed,
the fuse cover must be refitted. The appliance must
not be used without the fuse cover fitted.
If the plug is unsuitable, it should be dismantled and
removed from the supply cord and an appropriate
plug fitted as detailed. If you remove the plug it must
not be connected to a 13 amp socket and the plug
must be disposed of immediately.
If the terminals in the plug are not marked or if you
are unsure about the installation of the plug please
contact a qualified electrician.
Blue
(Neutral)
Brown
(Live)
Fuse
Green/Yellow
(Earth)
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
Ensure that the outer sheath of
the cable is firmly held by the cord grip
13A
