Product safety
Please read these instructions before operating the appliance
and retain them for future use.
This product is not suitable for use by children, and may not be
suitable for persons requiring supervision unless they receive
instruction by a competent person on how to safely use the
product.
Children should be supervised to ensure that they do not play with
the product.
This appliance generates heat during use. Adequate precaution
must be taken to prevent the risk of burns, scalds, fires or other
damage to persons or property caused by touching the exterior
whilst in use or during cooling.
Never use this appliance for anything other than its intended use.
This appliance is for household use only. Do not use this appliance
outdoors.
Always ensure that hands are dry before handling the plug or
switching on the appliance.
Always use the appliance on a stable, secure, dry and level
surface.
Never use a power base other than the one supplied with the
appliance.
This appliance must not be placed on or near any potentially hot
surfaces (such as a gas or electric hob).
The power cord is not replaceable by the user. Always return the
appliance if the power cord is damaged to avoid any hazard.
Do not use the appliance if it has been dropped, if there are any
visible signs of damage or if it is leaking.
Ensure the appliance is switched off and unplugged from the
supply socket after use and before cleaning.
Always allow the appliance to cool before cleaning or storing.
Never immerse any part of the appliance or power cord and plug in
water or any other liquid.
Never let the power cord hang over the edge of a worktop, touch
hot surfaces or become knotted, trapped or pinched.
Never leave the appliance unattended when in use.
Beware of steam coming from the spout or lid especially during
refilling. Never open the lid during the boiling cycle.
Never fill the appliance when it is positioned on the power base.
Never fill the kettle above the MAX marking. If the kettle is
overfilled, boiling water may be ejected.
Never use the kettle without sufficient water in the kettle for it to
operate correctly.
Never allow the appliance to boil dry.
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Before using for the first time
Remove any packaging and promotional material from your kettle and
position it on a stable, secure, dry and level work surface away from the
edge.
Before connecting to a power source, make sure your mains supply
voltage is the same as the one indicated on the appliance. Connect the
plug to a suitable power outlet and make sure that the power cord does
not overhang the work surface. Excess power cord can be stored in the
power base.
Fill your kettle to the maximum mark and close the lid.
Place the kettle back onto the power base. Switch the kettle on, allow
it to boil then discard the water. Repeat twice. This will remove any
residue left over from the manufacturing process.
•
•
Using your kettle
If this kettle is filled above the maximum level mark, hot
water may be ejected from the spout during boiling. Beware of
steam coming from the spout or lid especially during refilling.
Never open the lid when the kettle is boiling.
With the kettle switched off, plug the power base into a suitable
power outlet.
Remove the kettle from the power base before filling it with water.
Do not fill the kettle through the spout.
Fill the kettle with water. Don’t overfill the kettle and always ensure
that there is sufficient water in the kettle for it to operate correctly.
This is approximately 250ml or 1 teacup full. Always check the
water level when the kettle is positioned on its power base.
Make sure that the lid is closed correctly to ensure safe operation.
When the kettle is switched on, the water level window will
illuminate.
When the water reaches boiling point, the kettle will switch off
automatically.
You may also switch the kettle off manually at any time by moving
the switch to the off position.
Always use caution when carrying or pouring water from your
kettle when it is full of hot or boiling water.
If your kettle boils dry
If the kettle is operated with insufficient water a built in fail-safe device
will automatically switch off the kettle.
Unplug the kettle and allow it to cool. When the kettle has cooled
down sufficiently the device will reset itself.
Once the device has reset, refill the kettle with cold water and use
it as normal.
Energy saving hints and tips
A Breville kettle, if used correctly, is a very energy efficient device.
Why not try some of these energy saving tips:
Only boil the water you need. Overfilling your kettle by one cup is
the equivalent to using an energy saving light bulb for one hour!
It is not always necessary to re-boil your kettle. For example, one
litre of water will still be at 90°C after five minutes - the perfect
temperature for a cup of coffee.
1.
2.
3.
4.
5.
6.
7.
•
•
•
•
q
w
e
t
y
1 Spout
2 Lid
3 Lid release button
4 On/off switch
5 360° rotational power base with cord storage
6 Easy clean, fast boil concealed element
7 Water level window
r
©
Pulse Home Products Limited
. Breville is a registered trademark of Pulse Home Products Limited. Breville have a policy of continuous improvement and we reserve the right to change specifications without notice. Pulse Home Products Limited, Royton, Oldham OL2 5LN, UK.
u
