manualshive.com logo in svg

Breville VCF126, Manual, Page: 26 / 42

Share
Download
Breville VCF126 Manual Download Page 26

26

Cleaning Steam Wand
•  

Every time

 - 

 

After texturing milk purge the Steam 

Wand by turning the DIAL to HOT 

WATER for just 1-2 seconds.

 - 

 

Wipe the Steam Wand with a damp cloth. 

(See Coffee Making Guide page 13)

•  

2-3 Months

 - 

 

Soak the Steam Wand overnight in 

the Milk Jug with warm water & one 

Cleaning Tablet.

 - 

 

In the morning remove the Jug and 

rinse ensuring that all traces of the 

solution have been removed.

 - 

 

Wipe Steam Wand with a damp cloth 

ensuring that all traces of the cleaning 

tablet have been removed.

 - 

 

Run Hot Water through the Steam 

Wand for 40 seconds.

•  

Unblocking Steam Wand

 

If the Steam Wand Tip becomes 

clogged with milk residue:

 - 

 

Insert the thicker 'STEAM' Cleaning 

Pin up the Steam Wand Tip hole and 

remove.

 - 

 Run Hot Water through the Steam 

Wand for 40 seconds.

•  

Steam Wand Remains Blocked:

-  Unscrew the Steam Wand Tip and 

soak overnight in the Milk Jug with 

warm water & one Breville Cleaning 

Tablet.

 - 

 

In the morning rinse the Jug & Steam 

Wand Tip under running water 

ensuring all traces of the cleaning 

tablet have been removed.

 - 

 

Use the thicker 'Steam' Cleaning Pin 

to clean the Steam Wand Tip.

 - 

 

Ensure red O-ring is present & 

undamaged.

 - 

 

Screw the Steam Wand Tip back into 

the Steam Wand Arm.

 - 

 

Run Hot Water through the Steam 

Wand for 40 seconds. 

Cleaning Filter Baskets
•  

2-3 Months

 - 

 

Soak the Filter Basket(s) overnight in 

the Milk Jug with warm water & one 

Cleaning Tablet.

 - 

 

In the morning rinse the Jug & Filter 

Basket(s) under running water 

ensuring all traces of the cleaning 

tablet have been removed.

 - 

 

Place a Filter Basket into Group 

Handle (without coffee grinds) and 

insert into Group Head.

 - 

 

Press the ONE CUP BUTTON. 

 - 

 

 Allow water to run through until it stops.

•  

Unblocking Dual Wall Filter Baskets

 

 If the Dual Wall Filter Basket (not 

supplied with the Barista Max) becomes 

clogged with coffee grinds:

 - 

 

Insert the thinner 'FILTER' Cleaning 

Pin in the exit hole and remove.

 - 

 

Place Filter Basket into Group Handle 

(without coffee grinds) and insert into 

Group Head.

 - 

 

Press the ONE CUP BUTTON. 

 - 

 

 Allow water to run through until it stops.

 - 

 

Repeat if needed.

CARE & CLEANING - ESPRESSO MACHINE

UNSCREW

DUAL WALL

FIL

TER

INSERT

ESPRESSO

MACHINE

CLEANING

TABLETS

STEAM

INSERT

ESPRESSO

MACHINE

CLEANING

TABLETS

Summary of Contents for VCF126











































Reviews:

No comments