9
SAFETY BOIL DRY PROTECTION
The Urn is fitted with a safety device which
protects against overheating should the Urn be
operated with insufficient water or has boiled
dry. If this occurs, the Urn will stop heating.
Both the red and orange lights will turn off.
Switch off at the power outlet and allow the Urn
to cool down completely. The safety device will
then automatically reset and the Urn is now
ready for use.
CARE AND CLEANING
Always switch the Urn to Stand By, switch the
power off at the power outlet and then remove
the plug before cleaning. Never immerse the
Urn controls or cord in water, or allow moisture
to come in contact with these parts.
REMOVAL OF MINERAL DEPOSITS
Mineral deposits in tap water may cause the
Urn interior to discolour. This may be removed
by using a commercial kettle descaler which
is available from most leading supermarkets,
departments and hardware stores.
TO CLEAN THE POLISHED EXTERIOR
The stainless steel surface may be wiped over
with a damp cloth and polished with a soft dry
cloth.
WARNING
Do not use chemical, steel wool, or abrasive
cleaners to clean the outside of the Urn.
Care, Cleaning
& Storage