12
13
LIFT & LOOK™ BUTTON
This feature automatically raises and lowers
the carriage so you can check progress without
interrupting and/or cancelling the toasting
cycle.
To select this feature:
1. The LIFT & LOOK™ button surround will
illuminate in white during the toasting
cycle and when using the A BIT MORE™
feature. You can press the LIFT & LOOK™
button during toasting cycle to view the
toasting progress. If selected, the LIFT &
LOOK™ button surround will flash. The
LED toasting progress indicator will cease
to flash indicating that the selected toasting
cycle time has not been interrupted. When
the LIFT & LOOK™ cycle has finished, the
toasting cycle will re-commence, indicated
by the resumed flashing of LED toasting
progress indicator.
2. Approximately 10 seconds before the end
of the selected browning setting, the LIFT &
LOOK™ button will cease illumination and
cannot be activated in this time.
TOAST READY ALERT
A toast ready alert will sound when the toasting
cycle has finished and the carriage has risen
and locked into the raised position.
The default setting for the Toast Ready Alert is
High, but can be adjusted to Low or Mute.
Adjusting the Sound Level of the Toast Ready
Alert
Press and hold down the LIFT & LOOK ™
button for 2 seconds until the A BIT MORE™,
CRUMPET/FRUIT BREAD, & FROZEN button
illuminate white.
Mute:
Press FROZEN button, the light will flash three
times.
Low:
Press CRUMPET button, the unit will beep
three times with low sound.
High:
Press A BIT MORE™, the unit will beep three
times with high sound.
Care & Cleaning
STORAGE
Switch toaster off at the power outlet and
remove the power plug from the power outlet.
Allow the toaster to cool completely before
storing. Follow the directions for cleaning and
store in an upright position on a flat surface on
a bench top or in an accessible cupboard.
Do not store anything on top of the toaster.
WARNING
Do not use the toaster without the crumb tray
in position.
Do not allow crumbs to build up in the crumb
tray. Failure to clean the crumb tray regularly
may result in a fire hazard.
Switch the toaster off at the power outlet and
then remove the power plug from the power
outlet. Allow the toaster to cool completely
before cleaning.
To clean any crumbs from the toaster, remove
the crumb tray (located under the control
panel at the front of the toaster) by pulling it
outwards. Empty and replace the crumb tray
before using the toaster again. Replace the
crumb tray by sliding it inwards until it locks
into position.
To remove any additional crumbs, turn the
toaster upside down over a bin and shake
crumbs free.
Wipe the outside of the toaster with a slightly
dampened soft cloth and then dry it with a soft
dry cloth to dry completely.
NOTE
Do not clean with metal scouring pads. Pieces
can break off the pad and touch electrical parts
creating an electric shock hazard.
