Breville the Barista Express BES870 Page 28 Instruction Book Download

Page: 28 / 36

CLEANING THE OUTER HOUSING /

CUP WARMING PLATE

The outer housing and tray warming plate can

be cleaned with a soft, damp cloth. Then polish

with a soft, dry cloth.
Do not use abrasive cleansers, pads or cloths

which can scratch the surface.

CLEANING THE DRIP TRAY

The drip tray should be removed, emptied and

cleaned at regular intervals, particularly when

the drip tray full indicator is showing

EMPTY ME!.
Remove grid, compartments and EMPTY ME!

indicator from the drip tray. Dispose of the

grounds from the dry compartment into the

bin. Wash the drip tray with warm soapy water,

using a non-abrasive washing liquid, rinse and

dry thoroughly. The EMPTY ME! indicator

can be removed from the drip tray by pulling

upwards to release the side latches.
The drip tray base and cover are

dishwasher safe.

CLEANING THE STORAGE TRAY

The storage tray is located behind the drip tray

and is pulled forward when you slide

the drip tray out. Clean the tray with a soft,

damp cloth (do not use abrasive cleansers,

pads or cloths which can scratch the surface).

STORING YOUR MACHINE

Before storing, press the POWER button to off,

turn the steam dial to STANDBY switch Off at

the power outlet and unplug.
Remove unused beans from the hopper, clean

the grinder (see page 29), empty the water tank

and the drip tray.
Ensure the machine is cool, clean and dry.

Insert all accessories into position or into the

storage tray.
Store upright. Do not place anything on top.

WARNING

Do not immerse power cord, power plug

or appliance in water or any other liquid.

The water tank should never be removed or

completely emptied during decalcifying.

BES870_IB_F16.indd 28

16/06/2016 3:18 PM

Summary of Contents for the Barista Express BES870





































Search results

Summary of Contents for the Barista Express BES870

Reviews:

Related manuals for the Barista Express BES870

Brands by name

Popular brands

Breville the Barista Express BES870, Instruction Book

Search results

Summary of Contents for the Barista Express BES870

Reviews:

Related manuals for the Barista Express BES870

Brands by name

Popular brands