15
SETTING THE CLOCK
When the power is switched on, the LED will
display 1:00. Press the CLOCK button once to
set the digital clock in a 24 hour format.
NOTE
Before using PRESET, the clock must be
programmed to the correct time.
EXAMPLE: To set the clock time to 8:30:
1. Press the CLOCK button once and the
hours digits will flash.
2. Turn the TIME ADJUST/AUTO COOK
dial until 8 flashes on the LED display. Press
the CLOCK button to set this hour. The
minutes digits will begin to flash.
3. Turn the TIME ADJUST/AUTO COOK
dial until :30 is indicated. Press the CLOCK
button to set.
NOTE
Press the CLOCK button once to check clock
time during cooking.
NOTE
•
Do not remove the feet from the bottom of
the microwave oven.
•
Blocking the air intake and/or outlet
openings can damage the microwave oven.
•
Do not install the microwave oven over
a range cooktop or other heat-producing
appliance.
•
Place the microwave oven as far away from
radios and televisions as possible.
•
The operation of a microwave oven
may cause interference to your radio or
television reception.
•
The microwave must not be placed in a
cabinet.
WARNING
•
Do not install the microwave oven over
a range cooktop or other heat-producing
appliance.
•
If installed near or over a heat source, the
microwave oven could be damaged and the
warranty would be void.
•
Check the microwave oven for any damage,
such as misaligned or bent door, damaged
door seals and sealing surface, broken or
loose door hinges and latches and dents
inside the cavity or on the door.
•
If there is any damage, do not operate the
microwave oven and contact a Breville
service centre.
•
Do not immerse the microwave oven, power
cord or plug in water or any other liquid.
OPERATING THE MICROWAVE OVEN
1. Plug the power cord into a 230V or 240V
power outlet and switch on the power outlet.
The microwave LED display will illuminate
indicating it is ready.
