6
CLEANING THE FILTER
Removing/Refitting the Filter
Important: Before removing or
refitting the filter, switch the kettle off
and empty it. Allow to cool
completely then unplug the power
base.
To Remove the Filter
•
Ensure the kettle has cooled
fully and is empty.
Paying close attention to how
the filter is installed, gently
unclip.
To Clean the Filter
•
Rinse the filter under a tap
whilst brushing with a soft
brush. In hard water areas it
may be necessary to descale
with a descaling agent.
Use a proprietary descaler,
following the manufacturer’s
instructions carefully.
To Refit the Filter
•
Make sure that your hands are
clean and free from soap,
cream or anything which might
taint the water.
•
Place kettle on the worktop
and locate the filter into the
spout as follows:
Holding the top of the filter, clip
in bottom first, then top.
Note: To prevent damage to
the filter, avoid pressing the
mesh.
