Breville Crystal Clear Kettle BKE595XL, Instruction Book

Page: 5 / 14

8 9
oPERAtInG
your Breville product
oPERAtInG yoUR BREvILLE PRodUCt
BEfoRE fIRSt USE
Remove any promotional material attached
to your kettle. It is recommended that
before first use, the kettle is filled to the
maximum level with cold tap water then
boiled. Discard the water. Your kettle will
only operate when positioned on the power
base with the ON/OFF switch in the ON
position. The kettle will automatically switch
off once the water has boiled.
oPERAtIon of yoUR KEttLE
To fill the kettle, remove it from the power
base and open the lid by pressing the lid
release button. Fill with the desired amount
of water.
notE
Always fill the kettle between the
minimum (MIN) and maximum
(MAX) marks on the water window.
Too little water will result in the kettle
switching OFF before the water has
boiled. Filling above maximum (MAX)
mark may result in boiling water
splashing from the kettle.
Close the lid, ensuring it is locked firmly
into place. Position the kettle securely onto
the power base and insert the power plug
into a 110/120V power outlet. Press the
ON/OFF switch to the ON position for
water to boil.
notE
To operate correctly, the kettle should
always be used with the scale filter
firmly in place.
notE
This kettle must only be used with
the power base supplied. Use caution
when pouring water from your kettle,
as boiling water will scald. Do not
pour the water too quickly.
The kettle will automatically switch OFF
Once the water has boiled. Lift the kettle
from the power base and pour the water.
Take care to hold the kettle level, especially
when filled to the maximum level. To re-boil
it may be necessary to wait for a few seconds
to allow the control to reset. If further
heating of the kettle is not required, unplug
the power cord and empty the water from
the kettle. Replace the kettle onto the power
base and close the lid.
SAfEty BoIL dRy PRotECtIon
The kettle is fitted with a safety device
which protects against overheating should
the appliance be operated with insufficient
water. If this occurs, the kettle will stop
heating. Press the ON/OFF switch to the
OFF position and allow the kettle to cool
before refilling. Remove the kettle from the
power base and add water. Return the kettle
to the power base. The safety device will
then automatically reset.
For additional safety, your kettle is fitted
with an additional thermal cut out. In
the event of overheating, the kettle will
automatically shut down to prevent further
damage. Should this occur, contact Breville
Consumer Service.
WARNING
This appliance is designed for boiling
drinking quality water only. Never
use to heat or boil any other liquids
or foodstuffs. The lid should always
be firmly in place and locked into the
closed position before use.
WARNING
Do not press the lid release button
on the handle to open the lid during
operation. This may result in boiling
water splashing from the kettle. Pour
out all the hot water from the kettle
before opening the lid to refill.