Breville Cli-Mate CLI-AP30, Instruction Book

Page: 12 / 16

12
Care & Cleaning
EXTERNAL CLEANING OF UNIT
1. Do not clean unit with any abrasive
cleaning agents or solvents.
2. Do not apply any water directly to the unit
of cleaning.
3. Only use a soft clean cloth for all cleaning
purposes.
4. Clean the air inlet and outlet with a dry
cloth, soft brush or vacuum cleaner.
CLEANING THE PRE-FILTER
It is recommended that the Pre-filters
(the removable white layer) are cleaned every
2 weeks of unit operation, depending on the
air quality of the room. To clean the Pre-filter:
1. The removable pre-filters are attached by
Velcro. Gently peel away the pre-filters.
2. Run a vacuum cleaner with a nozzle
or brush attachment on low power setting
along both sides of the pre-filter.
3. Re-attach the pre-filters.
CLEANING THE HEPA AND
ACTIVATED CARBON FILTER
It is recommended that the HEPA and
activated carbon filters are cleaned every
100–500 hours of unit operation, depending
on the air quality of the room.
To clean the HEPA and Activated Carbon Filter:
1. Turn off unit and disconnect the power.
2. Place both hands at the bottom corners
of the rear cover, and pull out.
3. Pull out the 4 filters by the white belt attached.
4. Gently peel away the Pre-filter layers.
5. Run a vacuum cleaner with a nozzle
or brush attachment on low power setting
along the HEPA (white side) and Activated
Before carrying out any maintenance or cleaning of the unit, make sure that the power to the unit
is turned off and power cord is unplugged from the power socket.
Carbon (black side) filters to pick up the
dust and various particles.
6. Re-attach Pre-filter layers and place back
into the air purifier.
NOTE
When placing the filters back into the air
purifier, ensure that the white belts are facing
outwards and that the Pre-filters are facing
towards the air inlet.
REPLACING FILTER
When the lifespan of the 3-layer filter reaches
it end, the POWER light will flash, indicating
that it needs to be changed. Discard the old filter
and replace with a new one. It is not reusable.
The lifespan and duration of the filter depends
on the air quality and surrounding environment.
The higher level of pollutants, the shorter the filter
lifespan. It is advisable to change the filter at least
every 8 months or 2000 hours of unit operation.
Cli-Mate Replacement Filter Product Code:
CLI-AP30-RF.
HOW TO REPLACE THE FILTER
7. Turn off unit and disconnect the power.
8. OPEN THE REAR COVER: Place both
hands at the bottom corners of the rear
cover, and pull out.
9. REMOVE THE FILTER: Pull out the filters
by the white belt attached and discard.
10. INSTALL NEW FILTER: Replace with new
filters. Ensure that the white belt is facing
outwards and that the Pre-filter is facing
towards the air inlet.
11. Reattach the rear cover.
12. Hold down Speed button on the unit
to reset the unit.