background image

4

• Keep the unit away  

from fire, flammable gas, 

combustible products  

or vapours, and corrosive 

substances.

• Do not operate the unit 

without filters.

• When transporting the  

air purifier, always hold 

the handles on the side  

of the unit.

• To protect against 

fire, electric shock and 

personal injury, do not 

immerse cord, plugs,  

or appliance in water  

or other liquid.

• Do not place on or near  

a hot gas, electric burner 

or heating appliance.

• Check voltage to be sure 

that the voltage indicated 

on the nameplate agrees 

with your voltage.

IMPORTANT 

SAFEGUARDS 

FOR ALL 

ELECTRICAL 

APPLIANCES

•  Unwind the power cord 

fully before use.

• Do not let the power  

cord hang over the edge 

of a bench or table, touch 

hot surfaces, or become 

knotted.

• To protect against electric 

shock do not immerse 

power cord, power plug  

or appliance in water  

or any other substance.

• This appliance is not 

intended for use by 

persons (including 

children) with reduced 

physical, sensory or mental 

capabilities, or lack of 

experience or knowledge, 

unless they have been 

given supervision or 

instruction concerning  

use of the appliance  

by a person responsible  

for their safety.

Summary of Contents for Cli-Mate CLI-AH300

















Reviews: