Breville Cli-mate CLI-AH100, Instruction Book

Page: 8 / 12

8
Care & Cleaning
• Do not rinse the unit or immerse the unit
in water.
• Do not use detergent, soap, boiling water or
abrasive cleaners to clean any parts of the
unit. These will interfere with the proper
operation of the unit.
• Clean the surface of the device with
a soft cloth.
SCALE
To reduce the possibility of scale (white mineral
deposits) build-up on the surface of the water
basins, inner surface of the water tank and
transducer, the following is recommended:
• Change the water daily.
• If possible, use distilled or demineralised
water.
• Drain, clean and thoroughly dry all parts
of the unit before putting it into storage.
STORAGE
If you do not plan to use the unit for an
extended period of time empty water tank and
base completely. Do not store with water inside
base or water tank. Allow all components to
dry completely before storing. Store in a cool
dry location.
CAUTION: Before carrying out cleaning or maintenance of the product, always turn off and unplug
the cord from the power socket.
CLEANING THE TRANSDUCER
IMPORTANT
Do not spill water over the base of the unit
when rinsing transducer with clean water. Be
careful not to damage the Transducer during
cleaning. Do not use any brushes, sharp or
metal objects to scrape it or touch with bare
fingers.
If mineral deposits are evident on or around
the transducer,
clean the surface with a soft, clean cloth and a
small amount of undiluted white vinegar. To
remove mineral deposits, put 5-10 drops of
undiluted white vinegar on the surface of the
transducer. Leave to soak for 2-5 minutes. Use a
cotton swab to gently loosen up the scale of the
surface. Rinse the transducer with clean water
and wipe clean.
Transducer