Breville BSB310, Instruction Booklet

Page: 9 / 28

9
ASSEMBLy & OPERATION
BEFORE FIRST USE
Remove any packaging material and
promotional labels. Remove the blending
leg from the mixer motor body and wash
it in warm soapy water (refer to assembly
instructions in this booklet). Rinse and dry
thoroughly. Ensure no water remains inside
the blending leg to avoid water running into
the motor body when reattached.
Disassemble and wash the blending jug in
warm soapy water, rinse and dry thoroughly.
NOTE
The detachable blending leg, and
blending jug can be washed in the
dishwasher. The motor body is not
dishwasher safe – see the care and
cleaning section of this booklet for
cleaning instructions of these parts.
This stick mixer is a versatile appliance
that can be attached to:
• The blending leg– for use as a stick
mixer
TO ATTACH THE BLENdING LEG
Hold the blending leg with the blades down,
and align the top end of the blending leg
with the corresponding end of the motor
body and push until the blending leg ‘clicks’
and locks onto the motor body.
Always ensure blending leg is dry, and no
water left inside, before reattaching.
USING AS A STICK MIxER
Ensure the blending leg is assembled to the
motor body as detailed above.
1. Place food to be processed into the
blending jug provided (or a sufficiently
large mixing bowl or saucepan). The jug
provided should be only be ½ full or less
when blending liquids or when making a
puree of fruit and/or vegetables.
2. Insert the plug into a 230/240V power
outlet and turn the power on.
3. By turning the dial at the top of motor
body, select a speed between low
and high.
NOTE
If selecting a high speed, it is
recommended that you start with a
slow speed and gradually increase to
the higher speed to avoid splattering
and over-processing.
4. Place the blending leg as deeply as
possible into the jug and press the
trigger switch to turn the stick mixer on.
The button must be held for the required
duration of operation.