background image

7

Using the BRITA

®

 Memo Function

It is important to change your BRITA

®

 filter cartridge regularly 

to enjoy the benefits of BRITA

®

 filtered water. Filtering your 

water improves the look and taste of hot drinks by reducing 

limescale, chlorine, metals and other impurities.

The BRITA® Memo automatically reminds you when your 
filter cartridge needs to be changed. BRITA

®

 recommend to 

exchange the MAXTRA

®

 cartridge every 4 weeks.

When you have fitted and prepared your filter cartridge, start 
the Memo as follows:

1. 

Press and hold the START button until 4 bars appear on 

the display and flash twice. The Memo is now set.

2. 

The flashing dot in the corner of the display indicates that 

the Memo is working.

3. 

Every week, one bar will disappear to indicate the 

remaining cartridge life. When only one bar is showing, 
check that you have a replacement filter cartridge available.

4. 

After 4 weeks, all four bars will disappear and a flashing 

arrow will appear to indicate that the cartridge should be 

replaced.

Wash and dry the filter funnel, insert a new cartridge and 

restart the Memo as described above.

Please note that the Memo is only intended to be used with 
BRITA® filter cartridges.
More information on the use of BRITA

® 

water filter cartridges 

and the Memo can be found in the BRITA

®

 information guide.

Summary of Contents for Brita





















Reviews: