17
9. Slide the icon to the left and
Rename
Device
Delete
will appear on the
screen. To rename the connected controller,
select 'RENAME'. To delete the connected
controller, select 'DELETE' and the controller
will automatically be removed from the app.
10 . Repeat steps 4 to 9 to add another
controller. In the case of the Queen and King
sized heated blankets, the two controllers
must be set-up independently.
OPERATING YOUR VIRTUAL
CONTROLLERS
1. Ensure the mobile is connected to a Wi-Fi
network or the mobile data is switched on if
Wi-Fi is not available.
2. To use the virtual controller, slide the main
switch of the physical controller up from
'OFF' to 'AUTO' and ensure the home Wi-Fi
network is switched 'ON'.
3. Once logged in, the 'Controller List' will
display. Select a controller to remotely
operate. The app will display a virtual
version of the physical controller.
4. Toggle the switch on the virtual controller
to turn the blanket 'ON'. The settings can
then be adjusted on the virtual controller
by following the 'USING THE AUTO
SETTING' steps on page 14.
5. Switch the virtual controller 'OFF' when the
heated blanket is not in use by toggling the
switch at the bottom of the virtual controller.
The physical controller and heated blanket
will switch 'OFF' and go into standby mode.
6. To completely switch off the heated blanket,
slide the switch of the physical controller to
the 'OFF' position.
WARNING
When the Wi-Fi Enabled Heated Blanket is
not used for an extended period of time, slide
the control switch of the physical controller to
'OFF' and unplug at the power supply.
NOTE
The BodyZone Connect™ app displays a virtual
version of the physical controller.
NOTE
Individual user experience may vary
depending on the Internet connection.
SHARE VIRTUAL CONTROLLERS TO
OTHER MOBILES
1. To share a virtual controller with another
mobile device, select the controller from
the 'Controller List' using the mobile
device where the controllers are already
programmed (Mobile 1).
2. Select the icon on the top right-hand side
of the screen. The QR code will display.
3. On the receiving device (Mobile 2), select
on the 'Controller List' screen. Then select
'Via QR Code' to display the QR code
scanner.
4. Using Mobile 2, scan the QR code on the
screen of Mobile 1. The controller will be
automatically added to Mobile 2.
NOTE
The sharing functionality via QR code is useful
for controllers that are already connected to a
home Wi-Fi network.
LZB518_LZB538_LZB558_IB_Generic_C19_FA.indd 17
13/11/19 8:26 am
